Home | Modified
Sidearm Burner | Tube
Burners | Square
Body Atmospheric Gas Forge | Atmospheric
Forge
| Mini
Forge
| Simple
Air Hammer | Frequently Asked
Questions | Gas Forge Parts
|
Coffee Can
Forge |
Simple
Gas Forge Plans| Legal
Information
|
Forge Gallery |
New e-mail address: zman59@earthlink.net
May 22,2008: Update: New product added, simple gas forge burner holder assembly. I have also found a limited supply of 1" thick by 24" wide 6# density Inswool HTZ 2600 °F Ceramic Blanket at a very good price. Please see below for more information.
March 3, 2007: Update: Zoeller Forge now has a new URL it is http://www.zoellerforge.com. Please update your bookmarks. Thanks, Larry
December 8, 2006 : Update : There has been a price increase on some items due to higher cost of materials.
September 25, 2006: Update: New Product added Single and Two Burner connection kits. See below for more information.
|
Ordering Information |
|
Please
send me an e-mail with a list of the items you wish to purchase along
with your zip code so I can provide you with a total with shipping
included .
zman59@earthlink.net
Shipping and payment details
:
Shipping : We ship all orders via USPS ( United States Postal Service ) Payment methods accepted: We accept PayPal, Money Orders, Cashiers Checks and personal checks. Our PayPal account is mailto:zman59@earthlink.net If your are going to pay with PayPal, I can send you a PayPal invoice, you will get an e-mail and instructions on how to pay using PayPal. |
|
Stainless Steel Burner Flares |
||
I am currently making and selling pressed formed stainless steel burner flares that fit on 1/2", 3/4" and 1" burner pipes. The 3/4" size will work on the Modified Side Arm Burner, Ron Reil style, and the T-Rex burner. They will greatly improve the performance and the efficiency of the burner. Further information concerning the side arm burners can be found on my Side Arm Burner page. |
||
|
|
 |
 I have found a limited supply of 1" thick by 24" wide 6# density Inswool HTZ 2600 °F Ceramic Blanket at a very good price. This product list for $12.60 a running foot. I am selling it for $9.00 a running foot plus shipping. My supply is limited so you need to act now to get in this deal. |
 |
Simple gas forge burner holder assembly. The burner holder assembly is ready to install in you simple gas forge all the holes are drilled and taped. The assembly includes 1 1/2" x 4" schedule 40 black pipe nipple, (2) 1 1/2" conduit lock rings, (2) 2" x 1 1/2" rigid conduit reducing washers ( note: not shown in picture) , (3) 1/4-20 x 1" bolts, and, (3) 1/4-20 nuts. This assembly could also be used on a Freon tank forge or a Propane tank forge. When you use this assembly there is no welding required to install the burner holder. The burner holder assembly is $15.00 each plus shipping. |
 |
Side Arm Burner kits. This kit contains all the parts needed to build a 3/4" side arm burner, all parts have been drilled and tapped all you have to do is assemble the parts and tune the burner. The kit contains (1) 3/4" stainless steel burner flare, (1) 1 1/4" x 3/4" x 1 1 1/4" Ward reducing tee, (1) .035 contact tip, (1) 1 1/4" plug that has been drilled an tapped (1) 3/4" x 8" pipe threaded on one end, and (1) 1/8" x 4" schedule 80 pipe nipple threaded 1/8" female npt on one end. The side arm burner kits are $40.00 each plus shipping. |
 |
Vertical Sidewinder Gas Forge Plans The Vertical Sidewinder is a new style gas forge that was designed by Ralph Sproul to accommodate odd shaped forgings. The forge features single or dual burner operation, idle circuit for gas savings, firebox reconfigures on 3 sides & height and caster stand with 360 degree swivel and lock. The plans include 22 pages with 26 pictures and drawings. The plans are available for $42 with shipping included . |
 |
Single
Burner
Connection kit. The single burner connection kit contains all of the following listed items (1) POL tank fitting, (1) Fisher 67CH-743 Regulator, (1) 0 - 30 PSI Gauge, (1) 8 ft. long High Pressure LP hose with 9/16” L H female and ¼” Male NPT ends, (1) 9/16” L H Male x ¼ “ Male NPT Connector, (1) 1/4" N.P.T Brass Ball Valve, and (1) 1/4" x 1/8" black std. threaded bushing. The kit is $70.00 each plus shipping. The kit is sold unassembled. Click on the picture for a larger view. |
Picture Coming Soon |
Two Burner
Connection kit. The two burner connection kit contains all of the following listed items (1) POL tank fitting, (1) Fisher 67CH-743 Regulator, (1) 0 - 30 PSI Gauge, (1) 6 foot long High Pressure LP hose with 1/4" mpt fittings on both ends, (1) Y-block manifold, (2) 2 foot long high pressure LP hose with 9/16" L H female and 1/4" Male NPT ends, (2) 9/16” L H Male x ¼ “ Male NPT Connectors, (2) 1/4" N.P.T Brass Ball Valve, and (2) 1/4" x 1/8" black std. threaded bushing. The kit is $100..00 each plus shipping. The kit contains everything that you will need to hook up a two burner forge from the burners to the LP tank, it is sold unassembled. |
Picture Coming Soon |
The three burner
connection kit contains all of the following listed items (1) POL tank
fitting,
(1) Fisher 67CH-743 Regulator, (1) 0 - 30 PSI Gauge, (1) 6 foot long
High
Pressure LP hose with 1/4" mpt fittings on both ends, (1) 3-way
manifold,
(3) 2 foot long high pressure LP hose with 9/16" L H female and 1/4"
Male NPT ends, (3) 9/16” L H Male x ¼ “ Male NPT
Connectors, (3)
1/4" N.P.T Brass Ball Valve, and (3) 1/4" x 1/8" black
std. threaded bushing. The kit is $138.00 each plus
shipping. The
kit contains everything that you will need to hook up a three burner
forge from
the burners to the LP tank, it is sold unassembled.
|
Picture Coming Soon. |
The idle circuit kit contains the following items. (1) ¼” male NPT needle valve, (2) ¼” extruded brass tees, (1) ¼” extruded brass 90 degree elbow, (2) brass compression fittings ¼” tube x ¼” male NPT, (2) ¼” x 3” brass pipe nipples, (2) ¼” NPT hex nipples, (1) 9/16” L H Male x ¼ “ Male NPT Connector, (1) 2 foot long high pressure LP hose with 9/16" L H female and 1/4" Male NPT ends, (1) ¼” ball valve and (1) piece of ¼” copper tubing 10” long. The kit comes unassembled. The idle kit is $55.00 each plus shipping.
|
 |
Firebricks 9" long x 4 1/2" wide x 3/4" thick 3000°F 42% Alumina Firebricks, these make a great floors for gas forges. The firebricks are $5.00 each plus shipping cost. Five of these firebricks will fit in a Priority Flat Rate box, so the shipping cost would be $8.95 for five firebricks. Note: When requesting a quote for firebricks please state what size bricks your are interested in. |
 |
Insulated Firebricks 9" long x 4 1/2" wide x 2 1/2" thick 2600°F 46 lb. density Insulating Firebricks, these make a great front or back wall for gas forges. The firebricks are $5.00 each plus shipping cost. Three of these firebricks will fit in a Priority Flat Rate box, so the shipping cost would be $8.10 for three firebricks. These Insulated Firebricks lose less heat through furnace linings than do heavier refractories. This translates to lower operating cost. Note: When requesting a quote for firebricks please state what size bricks your are interested in. |
 |
Fiberfrax® Qf-180™ coating provides a range of consistencies for brush, spray, and trowel-on application that can be used on Durablanket or Duraboard. This coating has a 1260°C (2300°F) temperature grade rating. QF-180 possesses good adhesion, thermal reflectance, and hot gas erosion resistance. Approximate coverage is 6.25 square feet per pint. A pint is $25.00 plus shipping. |
|
Plistix 900F® is
a general service coating that not only
protects and extends the life of the refractory, but greatly improves
fuel efficiency as well, and minimizes the health concerns of airborne
ceramic fibers. It can be applied directly over ceramic
blanket and other refractory materials. (Note: The Plistix 900F
cannot be applied on the Duraboard) This is a great
substitute for ITC 100 at a much more reasonable price of $9.50 a pint
(16 ounce ) or $17.50 a quart (32 ounce)
plus shipping. Plistix 900F is in a powder form and is mixed with
water to the consistency of
a thin milkshake and is applied
to the refractory by dabbing it on with a paint brush, brushstrokes
tend to pull the fibers
apart. A pint of Plistix 900F applied at a 1/16
of an inch thickness will
cover approximately 1.2 square feet. |
 |
Tank Manifold Kit this allows you to connect two 20# LP cylinders together. If you are having problems with your 20# cylinder freezing up while running your forge, this kit will let you pull from two 20# cylinders at the same time reducing your chance of freezing the tanks. The kit contains the two parts shown on the left (1) Manifold block tee and (1) Hogtail with 3/8" O.D. by .049 copper tube by 12" long. The kit is $17.50 each plus shipping. The picture on the right shows the kit installed on two 20# cylinders. Click on the pictures for a larger view. |
 |
|
|
Gas Burners
ISBN:
1879535203 ~ paperback ~ 216 pages |
|
|
Durablanket®
S ceramic blanket to line the inside of gas forges, it is 24" wide with
8 lb. density 1260°C (2300°F) temperature grade rating and 1"
thick is $ 7.00 per running foot. |
Vesuvius (Thermal Ceramics) Thermotect® HT Board is a 2600° F grade Vacuum formed board that combines high temperature spun fibers with proprietary organic and inorganic binders / fillers to form a rigid fibrous board product are available in 24" x 24" x 1" thick pieces, with 22 to 25 lb. density. $100.00 each plus shipping. |
|
|
Fiberfrax®
Duraboard® LD |
 |
1/4"
N.P.T Brass Ball Valve |
|
|
1/4"
X 1/4" FPT 3-35 lb Fisher Regulator Model number 67CH-743 with
handwheel and gauge port |
|
|
1/4"
MPT x full flow Hard Nose POL 7/8 hex |
|
|
0
- 30 PSI Gauge bottom connect with 1/4" mpttt |
|
|
U.L. Listed Type I Propane Hose Assemblies
6 foot
long
High Pressure LP hose with 1/4" mpt fittings on both ends $12.00 each
plus shipping.
8 ft. long High
Pressure LP
hose with 9/16” L H female
and
¼” Male NPT ends and a 9/16” L H Male
x ¼ “ Male
NPT Connector. $16.00
each plus shipping 2 foot long High Pressure LP hose with 9/16” L H female and ¼” Male NPT ends and a 9/16” male LH x ¼” male NPT connector $9.50 each plus shipping
Custom
length hoses are also available upon request. Please e-mail or call me
for
pricing.
|
|
|
1
1/4" x 3/4" x 1 1/4" Ward standard black reducing tee. $8.50 each
plus shipping for Modified Side Arm Burner.
|
|
|
1/8" x 4" extra heavy (schedule 80 ) pipe nipple $3.00 each plus shipping. |
 |
1/4" x 1/8" black std. threaded bushing $1.00 each plus shipping. |
|
|
Brass
Needle Valve |
|
|
|
1/2” Tube Burner Parts Price List
|
|
(1A, 1B) Stainless Steel Burner
Nozzle $15.00
each plus shipping |
|
|
(2) Burner Tube $28.00 each plus shipping |
|
|
(3, 5) Advanced Choke Sleeve $9.00 each plus shipping |
|
|
(4) Advanced Bell
Reducer
$10.00 each plus shipping |
|
|
(6) Advanced Accelerator $7.00 each plus shipping |
|
|
(7) .023 Mig Contact Tip $3.00 each plus shipping |
The numbers on the left represents the same parts # as in the Gas
Burner book by Michael Porter
3/4” Tube Burner Parts Price List
|
|
(1A, 1B) Stainless Steel Burner
Nozzle $16.00
each plus shipping |
|
|
(2) Burner Tube $30.00 each plus shipping |
|
|
(3, 5) Advanced Choke Sleeve $9.00 each plus shipping |
|
|
(4) Advanced Bell
Reducer
$12.00 each plus shipping |
|
|
(6) Advanced Accelerator $7.00 each plus shipping |
|
|
(7) .035 Mig Contact Tip $3.00 plus shipping |
The numbers on the left represents the same parts # as in the Gas Burner book by Michael Porter
Each piece can be purchased separately or sold as a kit to be finished and assembled.
All prices above do not include shipping.
Please contact me with a list of parts wanted and I will send you a shipping quote via e-mail or phone.
All prices above are good in the continental
The
above price is for shipping to
Please e-mail me if you need prices for International shipping or
further assistance.
Send a check or money order to the address listed below, or you can now
buy them by using PayPal link below.
Larry Zoeller
4312
(502) 439-0812
mailto:zman59@earthlink.net
Updated: 07 / 05/
2008
All
prices are
subject to change and quotes are good for 30 days.